Supply voltage |
Load voltage L+ |
|
• Rated value (DC) |
24 V |
• permissible range, lower limit (DC) |
20.4 V |
• permissible range, upper limit (DC) |
28.8 V |
Input current |
|
from load voltage L+ (without load), max. |
160 mA |
from backplane bus 5 V DC, max. |
110 mA |
Power loss |
|
Power loss, typ. |
6.6 W |
Digital outputs |
|
Number of digital outputs |
32 |
Short-circuit protection |
Yes; Electronic |
• Response threshold, typ. |
1 A |
Limitation of inductive shutdown voltage to |
L+ (-53 V) |
Controlling a digital input |
Yes |
Switching capacity of the outputs |
|
• on lamp load, max. |
5 W |
Load resistance range |
|
• lower limit |
48 Q |
• upper limit |
4 kQ |
Output voltage |
|
• for signal "1", min. |
L+ (-0.8 V) |
Output current |
|
• for signal "1" rated value |
0.5 A |
• for signal "1" permissible range for 0 to 40 °C, min. |
5 mA |
• for signal "1" permissible range for 0 to 40 °C, max. |
0.6 A |
• for signal "1" permissible range for 40 to 60 °C, min. |
5 mA |
• for signal "1" permissible range for 40 to 60 °C, |
0.6 A |
max. |
|
• for signal "1" minimum load current |
5 mA |
• for signal "0" residual current, max. |
0.5 mA |
Output delay with resistive load |
|
• "0" to "1", max. |
100 卩s |
• "1" to "0", max. |
500 卩s |
Parallel switching of two outputs |
|
• for uprating |
No |
• for redundant control of a load |
Yes; only outputs of the same group |
Switching frequency |
|
• with resistive load, max. |
100 Hz |
• with inductive load, max. |
0.5 Hz |