MOXA NDR-120-24 Power Supply
The NDR Series of DIN rail power supplies is designed specifically for use in industrial applications. The 40 to 63 mm slim form-factor enables the power supplies to be easily installed in small and confined spaces such as cabinets. The broad operating temperature range of -20 to 70°C means they are capable of operating in harsh environments. The devices have a metal housing, an AC input range from 90 VAC to 264 VAC, and conform to the EN 61000-3-2 standard. In addition, these power supplies feature constant current mode to provide overload protection.
Features and Benefits
DIN-rail mounted power supply
Slim form factor that is ideal for cabinet installation
Universal AC power input
High power conversion efficiency
| Wattage | ENDR-120-24: 120 W NDR-120-48: 120 W NDR-240-48: 240 W |
| Voltage | NDR-120-24: 24 VDC NDR-120-48: 48 VDC NDR-240-48: 48 VDC |
| Current Rating |
NDR-120-24: 0 to 5 A NDR-120-48: 0 to 2.5 A NDR-240-48: 0 to 5 A |
| Ripple and Noise | NDR-120-24: 120 mVp-p NDR-120-48: 150 mVp-p NDR-240-48: 150 mVp-p |
| Voltage Adjustment Range | NDR-120-24: 24 to 28 VDC NDR-120-48: 48 to 55 VDC NDR-240-48: 48 to 55 VDC |
| Setup/Rise Time at Full Load | INDR-120-24: 2500 ms, 60 ms at 115 VAC NDR-120-24: 1200 ms, 60 ms at 230 VAC NDR-120-48: 2500 ms, 60 ms at 115 VAC NDR-120-48: 1200 ms, 60 ms at 230 VAC NDR-240-48: 3000 ms, 100 ms at 115 VAC NDR-240-48: 1500 ms, 100 ms at 230 VAC |
| Typical Hold Up Time at Full Load | NDR-120-24: 10 ms at 115 VAC NDR-120-24: 16 ms at 230 VAC NDR-120-48: 10 ms at 115 VAC NDR-120-48: 16 ms at 230 VAC NDR-240-48: 22 ms at 115 VAC NDR-240-48: 28 ms at 230 VAC |
|
Weight |
NDR-120-24: 500 g (1.10 lb) |
|
Housing |
Metal |
|
Dimensions |
NDR-120-24: 123.75 x 125.20 x 40 mm (4.87 x 4.93 x 1.57 in) |
| Model 1 | MOXA NDR-120-24 |
| Model 2 | MOXA NDR-120-48 |
| Model 3 | MOXA NDR-240-48 |
Related products
-
MOXA NPort 5430 Industrial General Serial Devic...
Features and Benefits User-friendly LCD panel for easy installation Adjustable termination and pull high/low resistors Socket modes: TCP server, TCP client, UDP Configure by Telnet, web browser, or Windows utility SNMP MIB-II for network management 2 kV isolation protection for NPort 5430I/5450I/5450I-T -40 to 75°C operating temperature range (-T model) Speci...
-
MOXA EDS-205A-M-SC Unmanaged Industrial Etherne...
Features and Benefits 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4), and maritime environments (DNV/GL/LR/ABS/NK) -40 to 75°C operating temperature range (-T models) ...
-
MOXA MGate MB3280 Modbus TCP Gateway
Features and Benefits FeaSupports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Converts between Modbus TCP and Modbus RTU/ASCII protocols 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports 16 simultaneous TCP masters with up to 32 simultaneous requests per master Easy hardware setup and configurationtures and Benefits ...
-
MOXA EDS-2010-ML-2GTXSFP 8+2G-port Gigabit Unma...
Introduction The EDS-2010-ML series of industrial Ethernet switches have eight 10/100M copper ports and two 10/100/1000BaseT(X) or 100/1000BaseSFP combo ports, which are ideal for applications that require high-bandwidth data convergence. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2010-ML Series also allows users to enable or disable the Quality of Service...
-
MOXA EDS-G205-1GTXSFP 5-port Full Gigabit Unman...
Features and Benefits Full Gigabit Ethernet portsIEEE 802.3af/at, PoE+ standards Up to 36 W output per PoE port 12/24/48 VDC redundant power inputs Supports 9.6 KB jumbo frames Intelligent power consumption detection and classification Smart PoE overcurrent and short-circuit protection -40 to 75°C operating temperature range (-T models) Specifications ...
-
MOXA NPort 5650-8-DT Industrial Rackmount Seria...
Features and Benefits Standard 19-inch rackmount size Easy IP address configuration with LCD panel (excluding wide-temperature models) Configure by Telnet, web browser, or Windows utility Socket modes: TCP server, TCP client, UDP SNMP MIB-II for network management Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC) ...